Double Glazing Lock Repairs
Quality locks on your windows and doors will stop burglars from getting into your home. They aren't likely to break glass or try to get through windows that are open.
Some double glazing owners, however, have encountered issues with their door or window lock following the installation. Fortunately, these issues are usually fixable and don't require to purchase new double glazing.
Broken or damaged locks
If your uPVC window or door lock is broken or faulty or has a problem, a locksmith will fix it. They will be able to repair the striker plates, hinges and locks on your double-glazed. They will also be able to adjust the cylinder's position to correct any misalignment issues that could be causing your handle to not work properly.
If the key fits in the lock but it won't turn or is difficult to insert, the mechanism might be seized up. This could be due to dirt or grime accumulating inside the mechanism. If this is the case, it may be possible for the lock to be cleaned and lubricated. It is important to make use of a dry lubricant like graphite or teflon, rather than oil, which attracts dirt and adhere to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should make through the mechanism and the lock should be able to rotate with ease.
A faulty lock can also be caused by loose screws in the lock mechanism. They can loosen and fall out or even break completely, preventing the lock from being able to perform as it should. A screwdriver can be used to tighten these screws however, care must be taken not to tighten them too much, because this could cause damage to internal components.
A damaged lock can be dangerous for you and your family. This is particularly true if you have small children. It's possible for them to unlock the door without knowing and thus allow them access to your home. If you're worried that this might occur, a licensed professional locksmith can help secure the double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC doors and windows. We can also modify the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always necessary.
Handles that are broken or damaged
Many double glazed windows feature a multi-point lock as part of the overall security package. This is a great choice for those who are worried about burglars who are opportunistic and trying to gain entry to their home. Ask your installer about antilift blocks. These can be installed as an addition to the existing locks and will aid in keeping your windows shut.
It's not uncommon for the handle locks to become damaged or even fail - they are the first part of your window that will be pushed open by a criminal intent on breaking into. Luckily, the good news is that this is one of the most simple parts to repair.
Modern uPVC and aluminium handles feature a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is available as an option on new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional extra on new double glazed window installations.
If a handle is defective, it's crucial to get it repaired as soon as is possible. A damaged handle can stop the window from closing properly and allow drafts in. It could also be a vulnerability that thieves can take advantage of, putting your family's belongings and your own at risk.
The process of fixing the failed mechanism starts with gaining access to the window frame and then removing the damaged handle. The gearbox is then opened to determine the kind of gearbox that is used to open the handle. This will allow to replace the handle that matches the profile and the internal window frame mechanisms.
After the mechanism has been replaced the handle can be re-attached using the original screws - however, we usually recommend replacing them with more long screws since this will provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further deterioration. After that the window will be fully operational again, and at less than the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows do not close properly, you could experience draughts, a weakening of your home's security barrier, and an increased risk of damp or water damage. Window hinges that break or fail to function properly are a common occurrence and can be easily repaired.
If your uPVC windows won't open or shut and close, it's likely hinges need to be replaced or repaired. While a lot of window companies require you to purchase a whole new window to solve this issue We can replace the faulty hinges and save you money.
Window hinges are often damaged by repeated use, or weakening over time due to corrosion. In the event of a damaged hinge, it's crucial to take measures to prevent further damage by taking care not to make the window swing open or closed.
Knowing the type of hinge you have will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to speak with an expert in this regard so that you don't make the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.
A faulty hinge is a major issue for uPVC doors and windows. They can be a significant source of noise and can also allow water to infiltrate which could damage your windows.
To fix this issue, first verify whether the pin barrel on both sides of the hinge is aligned. If not, tap the head pin using an hammer to create a small bend in the barrel of the hinge. This will hold the pin in place. Have a person hold the doors as you take off hinge screws and hinges. Replace the hinges and attach screws with glue. Finally, secure the hinges with clamps or weights until the glue sets.
Once you have repaired your hinges, you can install the door again. You could also reattach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw so that they are in line with each the other.
Broken or faulty glass
While uPVC windows do a great job of keeping cold out and heat in, they are susceptible to becoming damaged over time. This can include broken or damaged glass, as well as faulty locks. This is a problem that can be very expensive should it be left unattended. It can also affect the aesthetics of your home and could lead to a loss of insulation, which is why it's important to repair any damage as soon as possible.
If your glass has cracked, but not broken, you can usually fix it yourself with the proper tools and techniques. First, make sure the surrounding area surrounding the glass is clean so that any shards won't injure anyone and aren't an accident hazard. Then, remove the broken glass pieces and dispose of them in a proper way. Then, place masking tape over the entire area to stop pieces of glass from scattering and sticking to your skin when you move them. If you're dealing with a double-pane window, it's a good idea prepare the glass before gluing it back in place to ensure that you'll have enough space to finish the project.
Use a dry, clean cloth to wipe clean the surface of the broken glass and the frame before applying the glue. Follow the directions for application and curing time which may differ from product to. double glazing repair near me may need to clamp the broken glass with lightweight clamps designed to hold fragile materials, based on the angle.
After the adhesive has completely set, carefully place the glass into the window frame. Make sure it is aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Avoid flexing the glass as you reinstall it, as this could weaken the seal. This could result in condensation or water infiltration.
If you have a glass window that's broken completely or has bigger cracks, consult a professional glazier like O'Brien(r) to arrange an exchange. Leaving broken glass unattended can cause danger to children and pets It's therefore essential to act quickly.